36 Network Administrator’s Guide — Setup Flow for Fax Features
Setup Flow for Fax Features
This section describes the minimum setup flow to configure this equipment for Fax features.
Setup Flow for Network-Fax
Using the N/W-Fax driver, users can send a document to this equipment as a print job. The
equipment then sends the job to the fax numbers (or Email addresses) specified by the user
through the Public Switched Telephone Network or the Internet.
To send a fax through the Public Switched Telephone Network, users must configure the equip-
ment accordingly.
When sending an Internet Fax, the equipment sends the document to the SMTP server and trans-
fers it to the Internet. (A DNS server is required for the SMTP server to transmit the document
into the Internet.)
System Requirements
The N/W-Fax driver is available for following computers:
For e-STUDIO4511 Series:
• The fax transmission using the N/W-Fax driver is available only when optional Fax unit is
installed. The Internet Fax transmission using the N/W-Fax driver is available without
optional Fax unit.
For e-STUIO450 Series and e-STUDIO280 Series:
• The fax transmission using the N/W-Fax driver is available only when the Printer Kit or
Printer/Scanner Kit is installed in addition to optional Fax unit.
• The Internet Fax transmission using the N/W-Fax driver is available only when the Printer
Kit and Scanner Upgrade Kit are installed, or when the Printer/Scanner Kit is installed.
Connecting to Internet
Printing a document
using N/W-Fax driver
Send a document as
Internet Fax to the Internet
via SMTP server
Send a document as
fax document via
Public Switched Telephone
network
Internet
G3 Facsimile or
Internet Fax Device
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
To Next Page
Loading...
