Toshiba e-STUDIO 206L - Client Software Installation and Driver Setup

Chapter 1 PREPARATIONS
18
When the installation is completed, click [Finish].
7
Click [Exit] and then [Yes] to nish the installation.
8
• For details of the Client Utilities/User Documentation DVD,
see the following page:
&
P.65 “Client Utilities/User Documentation DVD“ in this
manual
• For details of the recommended installation, refer to the
following guide:
& Software Installation Guide (PDF): “Chapter 2:
RECOMMENDED INSTALLATION”
Setting the printer driver
Before using the printer driver, you must congure the options installed in the equipment.
Select [Devices and Printers] in the [Start] menu.
1
Select TOSHIBA Universal Printer 2, right-click and then click [Printer Properties].
2
The conguration data of the options can be obtained automatically by opening the
[Device Settings] tab menu.
3
Click [OK]. The setting is completed.
4