e-STUDIO200L/202L/230/232/280/282 CONTROL PANEL June 2004 © TOSHIBA TEC
5 - 20
(3) Remove 5 screws and take off the hinge
bracket.
Fig. 5-19
(4) Disconnect 5 connectors.
(5) Release the harness from 2 harness clamps.
(6) Remove 1 screw and take off the DSP board.
Fig. 5-20
(7) Remove 4 screws and take off the LCD.
Fig. 5-21
Hinge bracket
DSP board
LCD
05/11
To Next Page
Loading...
