What to do if my Toshiba e-studio 250 All in One Printer images are blurred?
If your copy images are blurred, ensure the original is placed firmly on the glass and the cover is closed properly. If the problem persists, try replacing the paper with new paper.
Why are my Toshiba All in One Printer copies stained?
If your copies are stained, make sure the cover is firmly closed to block external light. Clean the original glass with a cloth moistened with cleaning liquid, then wipe it dry. Also, clean the original cover with a cloth moistened with neutral detergent, then wipe the detergent off completely with a dry cloth. You may also need to adjust the image density properly or replace the toner cartridge.
Why are images partially missing from my Toshiba All in One Printer copies?
If images are partially missing from your copies, select the same size of copy paper as the original or set a reproduction ratio suitable for the paper size. You can also try setting a smaller image shift value.
What to do if the display doesn't change when keys are pressed on my Toshiba e-studio 250?
Try pressing any key except for the key. It takes a while until the digital multi function system becomes ready. Also, ensure you are inputting the correct department code. Finally, wait until the digital multi function system is ready.
General| Print Speed (Black) | 25 ppm |
|---|---|
| Print Speed (A4) | 25 ppm |
| Copy Speed | 25 cpm |
| Max Copy Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Original Size | A3 |
| Network Connectivity | Ethernet |
| Connectivity | Ethernet, USB |
| Fax Transmission Speed | 33.6 kbps |
To Next Page