Toshiba e-studio 250 - Construction; General Description; Paper Feeding System

December 2002 TOSHIBA TEC 9 - 1 e-STUDIO160/200/250 PAPER FEEDING SYSTEM
9. PAPER FEEDING SYSTEM
9.1 General Description
The paper feeding section feeds the paper from the paper cassette to the transfer section.
Driving of each of the paper feed and transport rollers is controlled by turning ON and OFF the clutches.
Each sensor detects the transport state of the paper.
9.2 Construction
The paper feeding system section consists of the following parts:
• Paper tray
• Tray-up assembly
• Pickup feed roller
• Pickup roller
• Paper empty sensor
• Pickup sensor
• Separation roller
• Feed sensor
• Registration roller
• Pinch roller
09-02-01
Pinch roller
Paper tray
Paper empty sensor
Tray-up assembly
Pickup sensor
Separation
roller
Pickup feed
roller
Feed sensor
Registration
roller
Pickup roller