Toshiba e-studio 250 - Construction of Drive System

December 2002 TOSHIBA TEC 10 - 1 e-STUDIO160/200/250 DRIVE SYSTEM
10. DRIVE SYSTEM
10.1 Construction of Drive System
The drive system drives the drum, developer, exit roller, heat roller, registration roller, cassette feed roller,
and drive transmission gears of options.
They are driven by the main motor.
Fig. 10-1-1 Drive system (Rear side view)
10-1-1 PPS2
Exit drive gear 1 (Exit roller)
Driven by ADU
ADU gear
Exit drive gear 6
Drum drive gear
(Coupling)
Developer drive pulley
(Coupling)
Registration roller
(Clutch)
Timing belt 309
Cassette feed roller
(Pick up clutch)
Cassette feed gear 8
SFB gear
2nd feed roller (Clutch)
PFU gear
Cassette feed gear 6
Timing belt 176
Main motor
HR drive gear 2 (Heat roller)
Exit drive gear 5
OCT or JSP gear
Part A
Part B
Part C