EasyManua.ls Logo

Toshiba e-studio 2306 - User Manual

Toshiba e-studio 2306
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MULTIFUNCTIONAL DIGITAL SYSTEMS
User’s Guide

Table of Contents

Other manuals for Toshiba e-studio 2306

Questions and Answers

  • D
    Douglas WelchAug 15, 2025
    What to do if my Toshiba Copier says 'TONER EMPTY'?
    • J
      josephweeksAug 15, 2025
      When the LCD screen displays 'TONER EMPTY', replace the empty toner cartridge with a new one.
  • B
    Billy WardAug 18, 2025
    What to do if my Toshiba Copier displays 'MISFEED xxx'?
    • J
      Jacob StewartAug 18, 2025
      If your Toshiba Copier shows a 'MISFEED xxx' message, the immediate solution is to remove any misfed paper from the unit.
  • B
    buchanankimberlyAug 21, 2025
    Why does my Toshiba Copier say 'ERROR : TONER'?
    • M
      Maria RiversAug 21, 2025
      The 'ERROR : TONER' message on your Toshiba Copier can appear for two reasons: either the toner cartridge is not correctly installed, or you are not using the recommended toner cartridge. Ensure the cartridge is properly installed. If you're using a non-recommended cartridge, the copier might not detect it.
  • J
    Jeffrey RodriguezAug 25, 2025
    What to do if my Toshiba Copier says 'DRAWER * EMPTY'?
    • M
      Michael BushAug 25, 2025
      If your Toshiba Copier displays 'DRAWER * EMPTY', it means you need to load paper into the specified drawer.
  • B
    Bethany HernandezAug 27, 2025
    What to do if my Toshiba Copier displays 'BYPASS EMPTY'?
    • C
      Connie AlexanderAug 27, 2025
      If your Toshiba Copier shows 'BYPASS EMPTY', you should load paper onto the bypass tray.
  • J
    Jessica AllenAug 30, 2025
    What to do if my Toshiba Copier says 'CLOSE ***'?
    • D
      Daniel SmithAug 30, 2025
      If the Toshiba Copier displays 'CLOSE ***', make sure that you securely close the cover.
  • P
    Phillip HernandezSep 2, 2025
    What to do if my Toshiba Copier displays 'CLEAR PAPER OUTPUT TRAY: PRESS START KEY'?
    • C
      Cynthia FullerSep 2, 2025
      If your Toshiba Copier shows the message 'CLEAR PAPER OUTPUT TRAY: PRESS START KEY', remove the paper from the receiving tray. Then, press the [START] key to continue copying.
  • Y
    yevansSep 5, 2025
    What to do if Toshiba Copier displays 'MEMORY IS FULL'?
    • M
      Michelle MooreSep 5, 2025
      If your Toshiba Copier displays 'MEMORY IS FULL', you have two options: select 'PRINT' on the LCD screen to copy the scanned data so far, or select 'CANCEL JOB' to delete all scanned data.
  • R
    Raymond RobinsonSep 8, 2025
    What to do if my Toshiba Copier displays 'COUNT OVER'?
    • C
      Catherine WalkerSep 8, 2025
      If your Toshiba Copier displays 'COUNT OVER', you can either select 'PRINT' on the LCD screen to copy the data scanned so far, or select 'CANCEL JOB' to delete all the scanned data.
  • R
    Ryan JoyceSep 12, 2025
    When should I replace the toner if my Toshiba Copier says 'TONER IS LOW'?
    • B
      Brett IrwinSep 12, 2025
      If your Toshiba Copier displays 'TONER IS LOW', do not replace the toner cartridge yet. Wait until 'TONER EMPTY' appears on the LCD screen before replacing it.

Summary

PREPARATION

Components

Describes the physical parts of the equipment.

Preparation 1 - Turning Power ON

Details on powering the device on and off, and energy saving modes.

Preparation 2 - Loading Paper

Instructions on how to load different types of paper into the device.

Preparation 3 - Registering Paper Size and Type

Explains how to register paper settings for drawers and bypass tray.

COPY FUNCTIONS

Basic Copy Procedure

Step-by-step guide for performing a standard copy operation.

Copy Settings

Explains various adjustable settings for copy jobs, like exposure and paper selection.

PRINT FUNCTIONS

Printing From Application

How to print documents from various applications using the printer driver.

Status Monitor

Utility for monitoring print jobs and reporting equipment status and errors.

Setting Up Print Options

Guide to configuring printer driver settings for specific print needs.

Printing With Best Functions for Your Needs

Details on using layout and finishing options for optimal printing.

SCAN FUNCTIONS

Setting Up Scan Options

How to configure various scan settings for optimal image acquisition.

Scan to USB Memory

Instructions for saving scanned images directly to a USB storage device.

Scan Settings

Detailed settings for color mode, resolution, original size, and more for scanning.

VARIOUS FUNCTIONS

Scan Menu List

Lists available functions and settings for scan operations.

User Functions Menu List

Overview of user-configurable settings and device functions.

TROUBLESHOOTING

Paper Misfeed

Procedures for identifying and clearing paper jams in various locations.

Replacing Toner Cartridge

Step-by-step guide for replacing the toner cartridge.

Before Calling Service Technician

Guidance on common issues and preliminary checks before contacting support.

MAINTENANCE AND INSPECTION

Cleaning Charger

Procedure to clean the charger to prevent image staining.

Appendix

Specifications of Options

Details on optional units like RADF and Duplexing Unit.

Packing List

Lists the items included in the product package.

Copying Function Combination Matrix

A table showing compatibility between different copy functions.

Toshiba e-studio 2306 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan
Print Speed (Black)23 ppm
First Print Out TimeApprox. 6.4 seconds
Multiple CopyUp to 999 copies
Scan Resolution600 x 600 dpi
Copy Speed23 cpm
Copy Resolution600 x 600 dpi
Max Paper SizeA3
Duplex PrintingManual
Dimensions575 x 540 x 402 mm
Paper SizeA4, A5, B5, Legal, Letter
Paper Capacity250 sheets
Network ConnectivityOptional
Operating System CompatibilityWindows, Mac, Linux
TypeLaser
Print Resolution2400 x 600 dpi (with smoothing)
Fax Transmission SpeedNot applicable

Related product manuals