1.PREPARATION
Components 15
1 PREPARATION
9. [START] button
Starts the copying or scanning operation.
10. Digital keys
Enters numbers such as the number of copies or password.
11. [OK] button
Determines the items or operations selected in each menu.
12. button
Press this button once on the main screen (Copy) to show the “EXPOSURE” screen for Europe and the Americas, or
the “ID CARD” screen for regions other than Europe and the Americas. Press it on menu screens to move to an item
on the right or increase the setting.
P.34 “Using the “EXPOSURE” or “ID CARD” function quickly”
13. button
Press this button on menu screens to move to the item above. If you press this button when the top menu item is
highlighted, the bottom menu item is displayed.
14. button
Press this button on menu screens to move to the item below. If you press this button when the bottom menu item is
highlighted, the top menu item is displayed.
15. button
Press this button once on the main screen (Copy) to show the “ORIGINAL MODE” screen. Press it on menu screens to
move to an item on the left or decrease the setting.
P.35 “Selecting “ORIGINAL MODE” quickly”
16. [CANCEL] button
Cancels the current settings and returns to the previous item.
17. Alert lamp
Blinks or lights in case of an error.
18. [DATA] lamp
This lamp blinks while print data is being received.
19. LCD screen
Confirms each menu and error messages.
P.16 “Main screen (Copy)”
20. [DRAWER] button/lamps
Use this button to select a drawer or the bypass tray to be used as a paper source. The lamp of the paper source
currently selected is lit. The lamp blinks when the selected drawer or tray is running out of paper.
When paper in the drawer or on the bypass tray has run out, see the following page to add paper.
P.19 “Preparation 2 - Loading Paper”
To Next Page
Loading...
