8
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 LASER OPTICAL UNIT
8 - 9
8.6 Disassembly and Replacement
[A] Laser optical unit
(1) Take off the toner cartridge.
(2) Take off the inner tray and tray back cover
(! P.2-35 "[K] Inner tray", ! P.2-36 "[M]
Tray back cover").
(3) Lift the duct and disconnect 1 connector.
Fig.8-10
(4) Remove 2 screws and take off the plate.
Fig.8-11
(5) Disconnect 1 connector from the rear frame.
Disconnect 2 connectors from the LRL
board.
Fig.8-12
Duct
Plate
05/07
To Next Page
Loading...
