8
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 LASER OPTICAL UNIT
8 - 11
[C] Internal cooling fan-2
(1) Take off the rear cover
(! P.2-31 "[C] Rear cover").
(2) Remove 1 screw and take off the harness
clamp. Take off the duct upper cover and
ozone filter.
Fig.8-16
(3) Disconnect 1 connector and remove 2
screws, and then take off the duct and the
internal cooling fan-2.
Fig.8-17
Duct upper cover
Ozone filter
Internal cooling fan-2
Duct
Screw
Screw
Connetor
04/07
To Next Page
Loading...
