e-STUDIO200L/202L/230/232/280/282 DRUM RELATED SECTION June 2004 © TOSHIBA TEC
11 - 20
[R] Temperature/humidity sensor
(1) Take off the inner tray
(! P.2-35 "[K] Inner tray").
(2) Lift the duct and disconnect 1 connector.
Fig.11-38
(3) Disconnect 1 connector, remove 1 screw and
take off the temperature/humidity sensor
cover.
Fig.11-39
(4) Remove 1 screw and take off the tempera-
ture/humidity sensor.
Fig.11-40
Duct
Connector
Screw
Temperature/humidity
sensor
To Next Page
Loading...
