117
3
Book-type original -> 2-sided copy
You can make a booklet-type copy in the same page configuration in which the original is.
• The acceptable paper size for this function is A4 or B5 only.
• To use this function, you need to install the automatic duplexer (if not equipped).
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance. ( P.71 “3.Bypass Copying”)
2
Press the simplex/duplex button on the basic menu.
3
Press the [BOOK -> 2] button.
To Next Page
Loading...
