Toshiba e-studio 2330C - Page 73

5
2
1
3
4
Specications of Options
71
Tray loading capacity of Hanging Finisher (MJ-1031)
(MJ-1031 with mixed paper not loaded)
Mode Non-Sort Sort/Group Staples loaded
A
4, A5-R, B5, LT, ST-R, 8.5”SQ
130 mm, 5.12”
(1000)
130 mm, 5.12”
(1000)
Whichever of 130 mm (5.12”), 1000 sheets
or 30 copies is reached rst
A3, A
4-R, B4, B5-R, FOLIO, 305 mm x 457 mm,
LD, LG, LT-R, COMP, 13”LG, 12” x 18”
65 mm, 2.56”
(500)
65 mm, 2.56”
(500)
Whichever of 65 mm (2.56”), 500 sheets or
30 copies is reached rst
• Sort/Group/Staple is not available with A5-R, B5-R, ST-R.
• If copied paper remains on the receiving tray and the next copying job is performed, the loading capacity is the same as that for mixed-size paper.
(MJ-1031 with mixed paper loaded)
Mode Non-Sort Sort/Group Staples loaded
FOLIO and A
4-R
65 mm, 2.56”
(500)
65 mm, 2.56”
(500)
Whichever of 65 mm (2.56”), 500 sheets or
30 copies is reached rst
A3 and A
4
B4 and B5
LD and LT
LG and LT-R
Unit: mm (with allowable error of ±4 mm or 0.158”)
Values in parentheses: Number of sheets (80 g/m
2
or 20 lb. Bond)
Unit: mm (with allowable error of ±4 mm or 0.158”)
Values in parentheses: Number of sheets (80 g/m
2
or 20 lb. Bond)
Hole Punch Unit (MJ-6101 Series)
Model name MJ-6101 Series
Acceptable paper size A3, A
4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP, 8.5”SQ, 13”LG, 8K, 16K, 16K-R
Acceptable paper
weight
6
4 - 256 g/m
2
, 17 lb. Bond - 140 lb. Index
(OHP lm and specially treated paper are not available.)
Dimensions 11
2 mm (4.41”) (W) x 573 mm (22.56”) (D) x 323 mm (12.72”) (H) (excl. Lower cover)
Weight A
pprox. 7 kg (15.4 lb.)
Number of punching holes and hole diameter Available paper size
Japan and most of Europe
(MJ-6
101E)
2 holes
(6.5 mm or 0.26” dia.)
A3, A
4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R,
COMP, 8.5”SQ, 13”LG, 8K, 16K, 16K-R
North America
(MJ-6
101N)
2/3 holes switchable
(8.0 mm or 0.32” dia.)
2 holes:
A4-R, LG, LT-R, COMP, 8.5”SQ, 13”LG, B4, B5,
B5-R, FOLIO, 16K-R
3 holes: A3, A4, LD, LT, 8K, 16K
France
(MJ-6
101F)
4 holes
(6.5 mm or 0.26” dia.; 80 mm or 3.15” pitch)
A3, A4, LD, LT, 8K, 16K
Sweden
(MJ-6
101S)
4 holes
(6.5 mm or 0.26” dia.; 70 mm and 21 mm or 2.76”
and 0.83” pitch)
A3, A
4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R,
COMP, 8.5”SQ, 13”LG, 8K, 16K, 16K-R