1.Information About Equipment
12 Description of Components
8. Lower receiving tray
9. Tray holder
Open the tray holder when an attempt to output paper, which has a length longer than that of A3, is made or if the
paper on the upper receiving tray does not align itself neatly. The output paper will be more likely to be aligned
properly.
Pull out the sub-tray when an attempt to output paper, which is longer than the lower receiving tray, is made. The
output paper will be more likely to be aligned properly.
MJ-5014
1. Tray
2. Paper stopper
MJ-5015
1. Tray
To Next Page
Loading...
