Toshiba E-STUDIO 3028A - Confirming Amount of Toner Remaining

1.Information About Equipment
Confirming Job Statuses of Printing/Copying/Scanning/Faxing 39
Information About Equipment
When [Job Status] blinks
When the paper in the drawer has run out during printing, [Job Status] on the touch panel blinks. In this case, press
[Job Status] so that the menu for displaying the printing status will appear and the button for the drawer whose paper
has run out will blink on this menu. Printing resumes when you add paper to this drawer.
 Confirming amount of toner remaining
You can confirm the approximate amount of toner remaining in the toner cartridge.
1
Press [Job Status] > the [Toner] tab.
When you have finished checking, press [Close]. The menu returns to the one shown before you pressed [Job
Status].