1.Information About Equipment
Description of Components 15
Information About Equipment
The sensing range can be changed with the switch located on the left front side of the equipment.
When the switch is shifted to the upwards, the sensing range is set to close. When the switch is shifted to the
downwards, the sensing range is set to far.
Since temperature variation is detected, the sensing of the motion sensor may be lowered depending on the
ambient temperature or installation environment.
The sensing may fail even if a person is in the sensing range of the motion sensor. Moreover, when a person cuts
across in front of this equipment, the sensing is carried out in a further away range.
When the equipment does not automatically recover from the sleep mode even if a person is in front of the motion
sensor, press the [ENERGY SAVER] button.
Nothing is displayed on the touch panel depending on the setting mode of the motion sensor.
The settings related to the motion sensor can be changed from the touch panel.
For details, see the reference below:
User Functions - SETTING ITEMS (Admin) - General - Setting the energy saver modes
To Next Page
Loading...
