e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
2 - 64
2. Copier-specific Adjustments
2.16 To Adjust the Twin-Color Copy Image Quality
Before the adjustment After the adjustment
When a twin-color copy is made in the red
and black mode, red may be blended in a
part of black area.
The blend of undesired colors in the black area
is reduced.
Explanation
When a twin-color copy is made, red may be blended into the black area or colors other than black on the twin-
color copy may look different from what the user desires. Adjust the tint of the colors, the reproducibility of
black in the Red and black mode, or the boundary between black and colors other than black, in order to reduce a
blend of undesired colors into the black area or adjust the tint of colors other than black.
Procedures
* The procedure to use varies, depending on whether to adjust the tint of colors other than black, the
reproducibility of black in the Red and black mode, or the boundary between black and colors other than black.
Refer to the procedure corresponding to the user’s particular request.
To Next Page
Loading...
Need help?
General
