1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 31
1 TROUBLESHOOTING FOR THE HARDWARE
Misfeed in the lower receiving tray
1
Raise the lever and open the upper receiving tray of
the finisher.
2
Remove the misfed paper.
3
Lower the shutter of the paper exit portion and
remove the paper.
4
Open the cover holding the handle of the Bridge Unit.
When the Hole Punch Unit MJ-6103 is installed, proceed to step 6.
5
Remove the misfed paper.
Proceed to step 9.
To Next Page
Loading...
