How to fix low image density on my Toshiba E-STUDIO 351C?
If the image density is too low on your Toshiba All in One Printer, replace the toner cartridge if the touch panel displays a message to do so. You can also use the manual density buttons or the background adjustment function to properly adjust the image density.
How to fix stained images from my Toshiba E-STUDIO 351C?
To resolve stained images from your Toshiba All in One Printer, ensure the cover or feeder is properly closed to block external light. Clean the platen sheet, Original Cover, and scanning area. Adjust the image density using the [AUTO] button or manual density buttons. If the other side of the originals is visible, lighten the image density with the background adjustment function. You can also place a blank sheet of paper of the same size or larger over the original.
How to fix high image density on my Toshiba E-STUDIO 351C All in One Printer?
To fix images with too high density on your Toshiba All in One Printer, use the manual density buttons or the background adjustment function to adjust the image density properly.
How to fix Toshiba All in One Printer when it does not start?
If your Toshiba All in One Printer doesn't start, ensure the power cord is fully inserted until it stops. Also, verify that the cover is properly closed.
Why should I not use alcohol to clean my Toshiba E-STUDIO 351C All in One Printer?
When cleaning your Toshiba All in One Printer, avoid using solvents like alcohol, thinner, or benzine. These substances can warp or discolor the surface of the equipment.
Why does paper jamming occur frequently in my Toshiba E-STUDIO 351C?
Frequent paper jams in your Toshiba All in One Printer can occur for several reasons. The message “Check paper size setting on control panel for drawer N (Bypass)” may appear, indicating that you should match the paper size in the drawer or bypass tray to the equipment's registered size. Another cause is exceeding the paper limit inside the side guide; remove some sheets to stay below the indicated line. Also, ensure an appropriate space between the side guide and the paper, placing the paper straight along the side guide. If the jammed paper is hard to find, follow the touch panel guidance.
What to do if my Toshiba E-STUDIO 351C All in One Printer display does not change when pressing buttons?
If the display of your Toshiba All in One Printer does not respond when you press buttons or icons, try the following: Press the [ENERGY SAVER] or [START] button on the control panel to exit the energy saving mode. You can also press the [START] button to power the device ON. Ensure you are entering the correct department code and user information. Finally, wait for the equipment to become ready.
What to do if my Toshiba All in One Printer images are blurred?
If the images from your Toshiba All in One Printer are blurred, place the original on the glass and firmly close the Reversing Automatic Document Feeder (if available). You may also need to replace the paper with new paper.
How to fix copy images that are partially missing from my Toshiba E-STUDIO 351C?
To correct partially missing copy images from your Toshiba All in One Printer, select copy paper that matches the original size, or adjust the reproduction ratio to fit the paper size. You might also need to adjust the image shift value.
Why Toshiba E-STUDIO 351C equipment does not start?
If your Toshiba All in One Printer does not start, ensure the power cord is fully inserted until it stops. Also, verify that the cover is properly closed.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Technology | Laser |
| Print Speed (Black) | 35 ppm |
| Print Speed (Color) | 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Copy Speed (Black) | 35 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Duplex Printing | Yes |
| Hard Drive | Optional |
| Maximum Copy Size | 11 x 17 inches |
| Scanner Type | Flatbed, ADF |
| Standard Paper Sizes | Letter, Legal |
| Interface | USB, Ethernet |
| Display | LCD |
To Next Page
