66
2.HOW TO MAKE COPIES
1.Setting Originals (Cont.)
2
Single feed mode
To switch over between the continuous feed mode and the single feed mode, see P.178 “16.ADF /
SADF”.
3
If there are more originals, set them in the same way.
• The same operation is performed whether or not you press the [YES] button.
4
After all originals have finished being fed, press the [FINISHED] but-
ton.
If the [FINISHED] button is not pressed, copying is started when the automatic function clear is operated.
P.34 “Clearing functions selected”
1
Align the side guides to the original
width.
2
Insert the original with its face up and
straight along the side guides.
• The original will be pulled in automatically. Be sure to let go of it
when it starts being pulled.
• The menu of step 3 will be displayed.
To Next Page
Loading...
