Toshiba E-STUDIO 351C - Recommended Paper; Handling and Storing Paper

48
1.BEFORE USING EQUIPMENT
4.Setting Copy Paper (Cont.)
1
Recommended paper
To make copies with a fine colour image, the following types of paper are recommended.
If you wish to use copy paper other than the recommended types, consult your service technician.
*1 Only Toshiba-recommended OHP film should be used. Using any other film may cause a malfunction.
Handling and storing paper
Pay attention to the following points:
• Avoid using paper that is specially treated or previously printed on another machine, and also avoid
performing double copying on the same side of the paper, since this may cause a malfunction.
• Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or rough paper; this
may cause paper misfeeds.
• Paper should be wrapped in its wrapping and stored in a damp-free place.
• To prevent paper from being folded or bent, store it evenly on a flat surface.
Paper type Toshiba recommendations/Manufacturer Mode
Plain paper
TGIS Paper/Neusiedler (80 g/m
2
)
PLAIN
Thick Colour Copy/Neusiedler
(90 g/m
2
)
THICK1
(100 g/m
2
)
THICK1
(120 g/m
2
)
THICK2
(160 g/m
2
)
THICK2
(200 g/m
2
)
THICK3
Sticker labels 3478/Zweckform-Avery THICK3
OHP film
*1
BG78/FOLEX OHP FILM