263
8
5. Print Status Display
When you press the [STATUS] button on the touch panel while no operation is in progress, the size of the
paper set in the drawer is displayed. When you press the [STATUS] button during printing, the drawer but-
ton being used for the feeding of this printing is highlighted.
Releasing print job errors
If the specified size of paper is not in the drawer when printing is to be performed from a client PC, a print
job error occurs. The [JOB STATUS] button blinks and the following menu is displayed.
Follow the procedure below to release the error.
Printing by placing sheets of paper on the bypass tray
1
Press the blinking [JOB STATUS] button.
To Next Page
Loading...
Need help?
General
