1 TROUBLESHOOTING FOR THE HARDWARE
32 Clearing a Paper Misfeed
When the Hole Punch Unit MJ-6103 is installed
9
Close the Bridge Kit cover.
6
Open the Hole Punch Unit cover.
7
Turn the green knob to get the misfed paper out.
8
Close the Hole Punch Unit cover.
10
Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray of the finisher can also be closed by
pressing the right side of the lever.
To Next Page
Loading...
