1 TROUBLESHOOTING FOR THE HARDWARE
70 Refilling With Staples
4
Remove the staple cartridge.
5
Take the empty staple case out of the staple cartridge.
Pull up the empty staple case while pushing both sides as shown in the
figure.
6
Fit a new staple case on the staple cartridge.
Push the staple case hook into the staple cartridge socket until you
hear a click.
7
Fit the staple cartridge into the stapler.
Insert the cartridge until it is caught by the latch and fixed with a click.
8
Return the Hole Punch Unit to its original position.
To Next Page
Loading...
