163
4
3
Press the [COMM. REPORT] button.
• The COMM. REPORT screen is displayed.
4
Specify the condition for each transmission type.
• [OFF] — Press this to disable printing the communication report.
• [ALWAYS] — Press this to print the communication report every transmission.
• [ON ERROR] — Press this to print the communication report only when an error occurs.
“DIRECT TX” and “POLLING” are available only when the optional Fax unit is installed.
5
When you press the [ALWAYS] or [ON ERROR] button for “MEMORY
TX” or “MULTI TX”, the “PRINT 1st PAGE IMAGE?” message is dis-
played. Press the [YES] button to print the communication report
with the first page image, or press the [NO] button to print the com-
munication report without the page image.
• Returns you to the COMM. REPORT screen.
To Next Page
Loading...
