Chapter 1 PREPARATIONS
16
Control panel
Use the buttons on the control panel for various operations and settings in the equipment.
1. [MENU] button
Use this button to display frequently used templates.
2. [COPY] button
Use this button to use the copying function.
3. [e-FILING] button
Use this button to access stored image data.
4. [SCAN] button
Use this button to use the scanning function.
5. [PRINT] button
Use this button to use the printing functions such as
private printing, in this equipment.
6. [FAX] button
Use this button to use the Fax / Internet Fax function.
7. MEMORY RX / LINE lamps
These lamps show the status of the Fax data reception and
Fax communication. The equipment can be operated even
while these lamps are lit.
8. [USER FUNCTIONS] button
Use this button for paper size or media type setting of
drawers, and registration of the copy, scan and FAX
settings including a default setting change. Refer to the
MFP Management Guide for the functions enabled by
this button.
9. [INTERRUPT] button
Use this button to interrupt print processing and perform
a copy job. The interrupted job is resumed by your
pressing this button again.
10. [COUNTER] button
Use this button to display the counter.
11. [ENERGY SAVER] button
Use this button for the equipment to enter the energy
saving mode.
12. MAIN POWER lamp
This lamp lights when the main power switch of this
equipment is ON.
13. ON/OFF lamp
This lamp lights when the POWER of this equipment is ON.
14. [POWER] button
Use this button to shut down the power of the equipment.
15. [FUNCTION CLEAR] button
When this button is pressed, all selected functions are
cleared and returned to the default settings. If the default
setting is changed on the control panel, and then copying,
scanning, Fax or similar is performed, this button blinks.
16. [STOP] button
Use this button to stop any scanning and copying
operations in progress.
17. [START] button
Use this button to start copying, scanning and Fax
operations.
18. [CLEAR] button
Use this button to correct the numbers keyed in, such as
the number of copy sets.
19. ALARM lamp
This lamp lights when an error occurs and the equipment
needs some actions to be taken.
20. PRINT DATA lamp
This lamp lights during reception of data such as print
data.
23
81 9 10 1311 12
14
15
22
16
17
181920217654
3 2
To Next Page
Loading...
