1 TROUBLESHOOTING FOR THE HARDWARE
22 Clearing a Paper Jam
33
Close the paper exit cover of the saddle stitch unit and the lower cover of the Saddle
Stitch Finisher.
Paper jam inside of the equipment
Be careful not to let your fingers be caught between the equipment and the External Large Capacity Feeder.
32
Remove the jammed paper.
34
Connect the finisher to the equipment.
Connect the finisher with the equipment while pressing the lock lever.
Place your hand on portion A in the figure and then move the finisher
carefully.
Be careful not to let your fingers be caught between the
finisher and the equipment.
A
1
Separate the External Large Capacity Feeder
(optional) from the equipment when the External
Large Capacity Feeder is attached.
Move it slowly while pushing the lock lever.
2
Open the paper feed cover.
To Next Page
Loading...
