Toshiba E-STUDIO 555 - Paper Loading Instructions

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 29
1 TROUBLESHOOTING FOR THE HARDWARE
 Jam when making copies or prints (using the bypass tray)
2
Remove the jammed paper.
4
Place the paper on the bypass tray and set the paper size.
5
Try copying or printing again.
 Jam when printing from the FAX
2
Remove the jammed paper.
1
Press the [POWER] button on the control panel until a
sound is heard.
“Shutdown in progress” appears on the menu. After a while, the power
of the equipment is turned OFF.
3
Press the [POWER] button on the control panel.
The equipment starts warming-up.
1
Turn off the main power switch.
Shutting down via the control panel is not possible in this case.
3
Pull out the drawer indicated in the message and
remove all the paper from the drawer.