5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux
Setting Up the CUPS 125
INSTALLING PRINTER DRIVERS FOR UNIX/Linux
Finishing
General
Option Value Alternative Value Description
Destination Printer’s Default
Exit Tray
Tray 1
Tray 2
Upper Exit Tray
Side Exit Tray
Job Separator Upper
Job Separator Lower
Select a destination.
The destinations that you can choose vary depending
on the model and the installed options.
Folding Off
, On Select whether the Folding feature is enabled or not.
Hole Punch Off
Long Edge Punch without rotation
Short Edge Punch without rotation
Long Edge Punch with 180 degree
rotation
Short Edge Punch with 180 degree
rotation
Select the hole punch option.
Stapling Off
Upper Left (Portrait)/Upper Right
(Landscape)
Middle Left (Portrait)/Middle Top
(Landscape)
Lower Left (Portrait)/Upper Left
(Landscape)
Upper Right (Portrait)/Lower Right
(Landscape)
Middle Right (Portrait)/Middle Bottom
(Landscape)
Lower Right (Portrait)/Lower Left
(Landscape)
Middle Top (Portrait)/Middle Right
(Landscape)
Middle Bottom (Portrait)/Middle Left
(Landscape)
Saddle Stitch (Portrait)/Saddle Stitch
(Landscape)
Select whether a print job is stapled or its locations.
“Saddle Stitch (Portrait)/Saddle Stitch (Landscape)”
can be selected only when the Saddle Stitch Finisher
is installed.
[Continue]
button
Determines the selected items.
Option Value Alternative Value Description
Collate Yes
, No Select whether to collate exited paper.
Duplex 1-Sided
1-sided printing
2-Sided, No Tumble (Long-Edge
Binding)
2-sided printing (Long-edge binding)
2-Sided, Tumble
(Short-Edge Binding)
2-sided printing (Short-edge binding)
To Next Page
Loading...
