Toshiba E-STUDIO2000AC - Installing Scan Driver and Utilities; Installing the Scan Driver and Utilities Using the Installer

INSTALLING SCAN DRIVER AND UTILITIES (Windows)
Installing Scan Driver and Utilities 133
0.Installing Scan Driver and Utilities
This section describes how to install the scan driver and utilities.
 Installing the scan driver and utilities using the installer
Perform installation corresponding to your Windows computer. However, you need to follow a different procedure
when you install WIA driver into Windows Vista or later / Windows Server 2008 or later. For the installation procedure
for these operating systems, see the following page:
 P.135 “Installing WIA driver to Windows computer”
To perform installation, you must log onto Windows with the “Administrator” account; this enables the installation
and uninstallation of client software.
1
Insert the Install Disc into the disc drive.
If Software Installer does not automatically start, use the Explorer to open the “e-STUDIO” folder in the Install
Disc and double-click “Setup.exe”.
2
Select [I agree to the terms of the License Agreement.] and click [Next].
To change the display language, select the desired language from the [Select Language] box.
3
Click [Scan Utility].
4
Confirm the list of the software to install and click [Install].
5
When the installation is complete, click [Finish].
The main menu is displayed.