3.INSTALLING PRINTER DRIVERS FOR WINDOWS
Installing the Printer Drivers 45
INSTALLING PRINTER DRIVERS FOR WINDOWS
SMB printing
Install a printer driver by specifying the SMB port manually.
Before starting the configuration, make sure that this equipment is connected to a network and also that its power
is turned ON.
If this equipment is not discovered over the network after the installation is started, a dialog box indicating this
appears. Click [Continue] to continue the configuration.
7
Enter a network path shown below in [Selected printer port].
\\<IP address or host name>\print
8
Click [OK].
9
Confirm that the installation is completed, and then click [Finish].
The Installer may ask you to restart your computer. If it does, select “Yes, I want to restart my computer now.”
and click [Finish] to restart your computer.
10
Click [Exit].
When a message appears asking whether to finish the installer, click [Yes].
To Next Page
Loading...
