Toshiba E-studio2040c - Page 37

2
35
Basic Printing Operation
Setting Universal Printer Driver
Select “NUMBER OF PAGES PER SHEET”
to print several pages on one sheet.
The pages are reduced to t the
selected paper size automatically and
printed.
To specify Destination or Front cover printing
Click the [Paper Handling] tab in the property dialog box of the printer driver.
To adjust Image Quality
Click the [Image Quality] tab in the property dialog box of the printer driver.
To print with character strings or graphics on the background of the paper
Click the [Eect] tab in the property dialog box of the printer driver.
To set not to print blank pages
Click the [Others] tab in the property dialog box of the printer driver.
To print with templates
Click the [Templates] tab in the property dialog box of the printer driver.
To specify paper size or number of copy sets
Click the [Basic] tab in the property dialog box of the printer driver.
To specify 2-sided printing or N-up printing
Click the [Finishing] tab in the property dialog box of the printer driver. If the Finisher (optional) is installed,
“Staple” or “Hole Punch” can be selected.
2IN1 4IN1
The [Paper Handling] tab, [Image Quality] tab, [Eect] tab and [Templates] tab appear only when each setting is enabled with
the Plug-in feature.
& Software Installation Guide (PDF): “Chapter 3: INSTALLING PRINTER DRIVERS FOR WINDOWS”