To Next Page

To Previous Page

Specications of Equipment

This section describes the types of acceptable paper, sheet capacity of each feeder and the specications of the equipment.

Specications of Equipment

Acceptable paper

Feeder Media type Weight Maximum sheet capacity Paper size

Drawers

(Including optional

drawers)

PLAIN,

RECYCLED

PAPER

64 - 105 g/m

17 - 28 lb.

Bond

600 sheets (64 g/m

, 17 lb. Bond)

550 sheets (80 g/m

, 20 lb. Bond)

500 sheets (81 - 105 g/m

, 24 lb.

Bond, 28 lb. Bond)

A/B format:

A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO

LT format:

LD, LG, LT, LT-R, ST-R, COMP, 13"LG,

8.5"SQ

K format:

8K, 16K, 16K-R

THICK1

106 - 163 g/m

- 90 lb. Index

300 sheets

THICK2

164 - 209 g/m

- 110 lb. Index

250 sheets

THICK3

210 - 256 g/m

- 140 lb. Index

200 sheets

Large Capacity

Feeder (optional)

PLAIN,

RECYCLED

PAPER

64 - 105 g/m

17 - 28 lb.

Bond

3000 sheets (64 g/m

, 17 lb. Bond)

2500 sheets (80 g/m

, 20 lb. Bond)

2000 sheets (81 - 105 g/m

, 21 - 28

lb. Bond)

A4, LT

Bypass tray

PLAIN,

RECYCLED

PAPER

64 - 105 g/m

17 - 28 lb.

Bond

100 sheets (64 - 80 g/m

, 17 - 20

lb. Bond)

80 sheets (81 - 105 g/m

, 21 - 28

lb. Bond)

A/B format:

A3, A4, A4-R, A5-R, A6-R

, B4, B5, B5-R,

FOLIO, 305 mm x 457 mm

*8, *9

320 mm x 450 mm

*9, *10, *11

320 mm x 460 mm

*8, *9, *11

LT format:

LD, LG, LT, LT-R, ST-R, COMP, 13"LG,

8.5"SQ, 12" x 18"

*8, *9

K format:

8K, 16K, 16K-R

Non-Standard size:

Length: 100 - 297 mm (3.9 - 11.7"),

Width: 148 - 432 mm (5.8 - 17")

THICK1

106 - 163 g/m

- 90 lb. Index

40 sheets

THICK2

164 - 209 g/m

- 110 lb. Index

30 sheets

THICK3

210 - 256 g/m

- 140 lb. Index

30 sheets

THICK4

*3, *4

257 - 280 g/m

- 150 lb. Index

30 sheets

SPECIAL1,

SPECIAL2

230 g/m

30 sheets

TRANSPARENCY

—

30 sheets

A4, LT

*1 To print on the back side of THICK1 to 3, use the bypass tray.

*2 For printing the sticker labels, select “THICK2” as the media type.

*3 The upper receiving tray of the Finisher (MJ-1101), upper receiving tray of the Saddle Stitch Finisher (MJ-1106), tray of the Hanging Finisher (MJ-1031)

and receiving tray of the equipment are available for paper exiting.

*4 When duplex copying is performed on THICK4, black streaks may appear on the copied image. They are highly visible on an image with high or uneven

density.

*5 SPECIAL1 and SPECIAL2 represent “Waterproof paper”.

*6 Automatic duplex copying is not available.

*7 For duplex copying, use waterproof paper for duplex copying.

*8 If an optional nisher has been installed, the receiving tray of the equipment is not available for paper exiting. The upper receiving tray of the Finisher

(MJ-1101) and upper receiving tray of the Saddle Stitch Finisher (MJ-1106) are available for paper exiting.

*9 When paper is exiting, remove one sheet after another from the receiving tray, since it may fall o the tray.

*10 If an optional nisher has been installed, the upper receiving tray of the Finisher (MJ-1101), upper receiving tray of the Saddle Stitch Finisher (MJ-1106)

and the receiving tray of the equipment are available for paper exiting.

*11 Note that black streaks may appear on the edge of the printed paper.