e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
LASER OPTICAL UNIT
8 - 10
[B] Laser control signal relay PC board (LRL board)
(6) Remove 3 screws with spring. Then take off
the laser optical unit.
Fig. 8-13
(1) Take off the plate
( P.8-9 "[A] Laser optical unit").
Fig. 8-14
(2) Disconnect 3 connectors from the LRL
board. Remove 1 screw and release 2 lock-
ing supports, then take off the LRL board.
Fig. 8-15
Laser optical unit
Plate
LRL board
05/07
To Next Page
Loading...
