Toshiba e-STUDIO233 - Page 239

9
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
PAPER FEEDING SYSTEM
9 - 33
(15) Slide the registration roller (rubber) to the
rear side. Then remove the gear.
Fig. 9-65
(16) Pull out the registration roller (rubber) to the
front side.
Fig. 9-66
(17) Remove the clip of registration roller (metal).
Fig. 9-67
Gear
Registration roller
(
rubber
)
Registration roller
(
rubber
)
Clip