Toshiba e-STUDIO233 - Page 286

e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
DEVELOPMENT SYSTEM
12 - 16
(12) Remove 2 screws. Take off 1 bearing and the
bracket.
Fig. 12-25
(13) Take off 3 gears and 1 timing belt.
Fig. 12-26
(14) Remove 1 E-ring, 1 pin and 1 pulley.
(15) Take off the guide roller on the rear side.
Fig. 12-27
Bearing
Bracket
Timing belt
GearGear
Pulley
Guide roller
E-ring
Pin