12
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
DEVELOPMENT SYSTEM
12 - 17
[H] Mixer
(16) Remove the seal on the front side. Remove 1
E-ring and 1 bushing.
Fig. 12-28
(17) Take off the developer sleeve.
Fig. 12-29
(1) Take off the developer sleeve
( P.12-13 "[G] Guide roller / Developer
sleeve").
(2) Take off the doctor sleeve.
Fig. 12-30
Seal
E-ring Bushing
Developer sleeve
Doctor sleeve
To Next Page
Loading...
