15
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0102)
15 - 17
[J] Lower transport roller
(1) Take off the ADU cover
( P.15-12 "[E] ADU cover").
(2) Remove 2 screws and take off the exit guide.
Fig. 15-30
(3) Remove 2 clips, 2 pulleys and 2 pins on the
front side. Then take off the timing belt.
Fig. 15-31
(4) Remove 1 clip on the rear side. Take off 2
bushings and lower transport roller.
Fig. 15-32
Exit guide
Pin
Pin
Timing belt
Pulley
Clip
Bushing
Bushing
Clip
Lower transport roller
To Next Page
Loading...
