Toshiba e-STUDIO233 - Page 53

2
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
OUTLINE OF THE MACHINE
2 - 19
S15 EMP-L-SNR
Lower drawer empty sensor
Paper presence/absence detection in
the lower drawer
* e-STUDIO230/280/232/282 (NAD/
AUD/MJD/IRD/CND/TWD/KRD),
e-STUDIO233/283 (NAD/MJD/
CND), e-STUDIO280S/282S/283S/
232S (CND) models: Standard
* e-STUDIO200L/202L (NAD/ASD/
ARD), e-STUDIO203L (NAD/ARD),
e-STUDIO230/280/232/282 (ASD/
ASU/SAD/ARD), e-STUDIO233/283
(ARD), e-STUDIO230L (MJD) mod-
els: Option
P.2-9
"Fig. 2-
11"
P15-I104
S16 SIDE-COV-SNR
Side cover opening/closing sensor
Side cover opening/closing detection P.2-10
"Fig. 2-
12"
P17-I101
S17 RGST-SNR
Registration sensor
Detecting the paper transport at the reg-
istration roller section
P.2-10
"Fig. 2-
12"
P21-I10
S18 FEED-SNR-1
1st transport sensor
Detecting the transporting paper and
jamming fed from the bypass, drawer,
ADU
P. 2 -11
"Fig. 2-
14"
P12-I102
S19 SFB-SNR
Bypass paper sensor
Detecting presence/absence of paper
on the bypass tray
P. 2 -11
"Fig. 2-
13"
P20-I104
S20 FEED-SNR-2
2nd transport sensor
Detecting the transport paper and jam-
ming fed from the lower drawer or PFP/
LCF
P. 2 -11
"Fig. 2-
13"
P19-I13
S21 SFB-SIZE-SNR
Paper size detection sensor
Detecting the width of paper on the
bypass tray
P. 2 -11
"Fig. 2-
13"
P18-I12
S22 ADU-TRU-SNR
ADU entrance sensor
Detecting the transporting paper at auto-
matic duplexing unit entrance section
* e-STUDIO230/280/232/282
(NAD/AUD/MJD/IRD/CND),
e-STUDIO233/283 (NAD/MJD/CND)
models: Standard
* e-STUDIO200L/202L (NAD/ASD/
ARD), e-STUDIO203L (NAD/ARD),
e-STUDIO230/280/232/282 (ASD/
ASU/SAD/TWD/KRD),
e-STUDIO233/283(ARD),
e-STUDIO230L (MJD),
e-STUDIO280S/232S/282S/283S
(CND) models: Option
P.2-12
"Fig. 2-
15"
P32-I31
Symbol Name Function Remarks P-I
07/11