Toshiba e-STUDIO233 - Page 55

2
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
OUTLINE OF THE MACHINE
2 - 21
3) Electromagnetic clutches
4) Solenoids
Symbol Name Function Remarks P-I
CLT1 RGST-CLT
Registration roller clutch
Driving the registration roller P.2-14
"Fig. 2-
17"
P21-I26
CLT2 TR-U-CLT
Upper transport clutch
Driving with high speed for the 1st trans-
port roller
P.2-14
"Fig. 2-
17"
P21-I24
CLT3 TR-M-CLT
Middle transport clutch
Driving with low speed for the 1st/2nd
transport roller
P.2-14
"Fig. 2-
17"
P7-I8
CLT4 TR-L-CLT
Lower transport clutch
Driving with high speed for the 2nd
transport roller
P.2-14
"Fig. 2-
17"
P7-I8
CLT5 CST-U-FEED-CLT
Upper drawer feed clutch
Driving the upper drawer pickup roller P.2-9
"Fig. 2-
11"
P15-I11
CLT6 CST-L-FEED-CLT
Lower drawer feed clutch
Driving the lower drawer pickup roller
* e-STUDIO230/280/232/282 (NAD/
AUD/MJD/IRD/CND/TWD/KRD),
e-STUDIO233/283 (NAD/MJD/
CND), e-STUDIO280S/282S/283S/
232S (CND) models: Standard
* e-STUDIO200L/202L (NAD/ASD/
ARD), e-STUDIO203L (NAD/ARD),
e-STUDIO230/280/232/282 (ASD/
ASU/SAD/ARD), e-STUDIO233/283
(ARD), e-STUDIO230L (MJD) mod-
els: Option
P.2-9
"Fig. 2-
11"
P15-I11
CLT7 SFB-FEED-CLT
Bypass feed clutch
Driving the bypass pickup roller and
bypass feed roller
P. 2 -11
"Fig. 2-
13"
P20-I18
CLT8 ADU-CLT
ADU clutch
Driving the ADU
* e-STUDIO230/280/232/282
(NAD/AUD/MJD/IRD/CND),
e-STUDIO233/283 (NAD/MJD/CND)
models: Standard
* e-STUDIO200L/202L (NAD/ASD/
ARD), e-STUDIO203L (NAD/ARD),
e-STUDIO230/280/232/282 (ASD/
ASU/SAD/TWD/KRD),
e-STUDIO233/283(ARD),
e-STUDIO230L (MJD),
e-STUDIO280S/232S/282S/283S
(CND) models: Option
P.2-12
"Fig. 2-
15"
P32-I16
Symbol Name Function Remarks P-I
SOL SFB-SOL
Bypass pickup solenoid
Driving the bypass pickup roller P.2-11
"Fig. 2-
13"
P19-I11
07/11