Toshiba E-studio2555c - Page 42

Chapter 3 MAINTENANCE
40
1
Open the front cover of the Finisher, and then pull
out the saddle stitch unit.
2
Take out two empty staple cartridges.
3
Take the empty staple case out of the staple
cartridge.
4
Install a new staple case into the staple cartridge
and remove the seal bundling the staples.
5
Install two new staple cartridges.
6
Insert the saddle stitch unit into the Finisher, and
then close the front cover of the Finisher.
Saddle Stitch Unit of Saddle Stitch Finisher