1 TROUBLESHOOTING FOR THE HARDWARE
70 Refilling With Staples
2
Remove the staple cartridges.
Replace both cartridges at a time.
3
Press the buttons on both sides of the cartridge.
The transparent cover of the cartridge is lifted.
4
After the transparent cover is lifted, take the empty
staple case out of the cartridge.
5
Fit the new staple case into the staple cartridge.
Insert it to the rear until it clicks.
In this step, do not remove the seal bundling the staples.
6
Press down the transparent cover of the cartridge.
Press it down until it clicks.
2
1
2
1
2
1
To Next Page
Loading...
