88 Copying the Same Image Repeatedly on One Sheet (Image Repeat) (Color Model only)
0.
Copying the Same Image Repeatedly on One Sheet (Image Repeat) (Color Model only)
You can copy a certain area on an original repeatedly in the times that you specified. This function is called “image
repeat”.
You can repeat copying up to 8 times.
Only standard size originals are available.
When registering this function into a template, be sure to select [DISABLE] of “AUTOMATIC START”. If [ENABLE] is
selected, copies may not be made correctly because the original size is not detected.
1
Press [IMAGE REPEAT] on the EDIT menu.
2
Place the original on the original glass with its face up.
Place it with its bottom toward you. Align its top left corner against that of the original glass so that the original
will be aligned with the original scales.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Breaking the glass could injure you.
To Next Page
Loading...
