2.SETTING ITEMS (ADMIN)
Setting List/Report 193
2 SETTING ITEMS (ADMIN)
3
Specify the conditions for each transmission type and press [OK].
The RELAY ORIGINATION, RELAY STATION and RELAY DESTINATION settings are available only when the
FAX Unit (optional) is installed.
When you press [ALWAYS] or [ON ERROR] for each transmission type, the “Print 1st page image?” message is
displayed. Press [YES] to print the communication report with the first page image, or press [NO] to print the
communication report without the page image.
To Next Page
Loading...
Need help?
General
