1 SETTING ITEMS (USER)
18 Setting Copy Functions
4
Specify the following items as required and press [OK].
ORIGINAL MODE FOR AUTO COLOR — Press the desired mode button that is applied when you copy
documents in the Auto Color mode.
OMIT BLANK PAGE ADJUSTMENT — Use and to select the appropriate sensitivity from 7 levels to
detect blank pages from the scanned data in a copy job. The higher the level is, the more likely the equipment is to
detect blank pages. For more information about the Omit Blank Page function, refer to the Copying Guide
“Chapter 4: EDITING FUNCTIONS”.
ACS ADJUSTMENT — Use and to select the appropriate sensitivity from 7 levels to detect whether the
data scanned in the Auto Color Copy mode are color or black. The higher the level is, the more likely the equipment
is to detect the scanned data as a color document.
The default settings are changed as specified.
Setting Copy Functions (e-STUDIO456 Series, e-STUDIO856 Series, e-STUDIO306LP)
1
Specify the following items as you require and press .
EXPOSURE — Press the desired mode button.
IMAGE DIRECTION — Press the desired mode button. For details on the image direction option, refer to the
Copying Guide “Chapter 4: EDITING FUNCTIONS”.
To Next Page
Loading...
Need help?
General
