3.MANAGING COUNTERS (COUNTER MENU)
Managing Department Codes 227
3 MANAGING COUNTERS (COUNTER MENU)
4
Enter the administrator password and press [OK].
The DEPT. MANAGEMENT menu is displayed.
y If the administrator password has not been changed before, enter the default administrator password
“123456”.
y The input password appears as asterisks (*). You can also use the digital keys on the control panel to enter
numerals.
5
Continue the operation that you require.
P.228 “Printing DEPARTMENT CODE LIST”
P.229 “Enabling department codes”
P.230 “Registering a new department code”
P.233 “Editing department codes”
P.236 “Deleting department codes”
P.237 “Resetting the counter for each department”
P.239 “Setting output limitations for all departments”
P.240 “Setting the No Limit Black function”
P.241 “Setting the registered quota”
P.242 “Resetting all department counters”
P.243 “Deleting all department codes”
y Menus other than “DEPARTMENT MANAGEMENT” and “DEPARTMENT REGISTRATION” will be
available after you register a department code and enable the Department Management feature.
y [NO LIMIT BLACK] is available only for the e-STUDIO6550C Series and e-STUDIO4540C Series.
To Next Page
Loading...
