5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux
106 Configuring UNIX/Linux printing using UNIX/Linux filters
Creating a print queue manually on Linux
1
Enter the following command:
ls /opt/toshiba/tap/interface
2
If the above directory does not exist, enter the following command:
mkdir /opt/toshiba/tap/interface
3
Log on to the root account.
4
Open your UNIX/Linux editor.
5
Create the following file.
/opt/toshiba/tap/interface/<queue name>.conf
6
Add a line as below in the <queue name>.conf.
dest=<IP address>
7
Save the file.
8
Enter the following command:
Color MFP:
cp /opt/toshiba/tap/model/net_estcolor \
/opt/toshiba/tap/interface/<queue name>
Black and White MFP:
cp /opt/toshiba/tap/model/net_estbw \
/opt/toshiba/tap/interface/<queue name>
9
Enter the following command:
/opt/toshiba/tap/bin/modPrintcap \
-a <queue name> <IP address>
10
Enter the following command:
ls /opt/toshiba/tap/bin/flag_<queue name>
The file in step 10 does not exist when the operations from step 1 to 9 are correctly performed. In that case, the
operation of step 11 is not required to be performed. Skip to step 12.
11
If the above file exists, enter the following command.
/opt/toshiba/tap/bin/printconf_import \
-a <queue name> <IP_ADDRESS>
rm /opt/toshiba/tap/bin/flag_<queue name>
12
Restart your lpd.
To Next Page
Loading...
Need help?
General
