Toshiba E-studio3555c - Troubleshooting Finisher Access and Help Functions; Covers of the Finisher, the Hole Punch Unit and the Bridge Unit; Using the Help functions

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 47
1 TROUBLESHOOTING FOR THE HARDWARE
2
While holding the green lever, move the finisher to the
left until it stops.
3
Open the Hole Punch Unit while pushing the green
lever.
4
Remove the staple cartridge.
5
Lower the guide while holding the knob.
Do not touch the stapling area.
The actual needle point could cause you personal injury.
6
Remove the top staple sheet.
2
1
2
1