2 PRINTING FROM WINDOWS
116 Printing With Best Functions for Your Needs
7
Select the [Folding] check box if you want to fold the document at its center.
The “Folding” option is available only when the Saddle Stitch Finisher is installed in any of the
following:
- e-STUDIO6570C Series
- e-STUDIO6550C Series
- e-STUDIO4540C Series
- e-STUDIO507 Series (only when the MJ-1108 is installed)
- e-STUDIO456 Series (only when the MJ-1106 is installed)
8
If you want to double-staple the center, select the [Staple Down the Center] check box.
[Staple Down the Center] is available only when the Saddle Stitch Finisher is installed and
configured on the [Device Settings] tab.
9
Click [OK] to close the [Booklet Details] dialog box.
10
Set any other print options you require and click [OK].
11
Click [OK] or [Print] to send the print job.
The print job is printed as a booklet.
If the Saddle Stitch Finisher is installed, the printed document is folded at its center when the
[Folding] check box is selected. If this is not installed, fold the printed document manually.
To Next Page
Loading...
