2.PRINTING FROM WINDOWS
Setting Up Print Options 49
2 PRINTING FROM WINDOWS
The selectable options vary depending on the model, paper size, and orientation.
The “Staple” option is available only when the Finisher is installed.
[Center Double] can be selected only when the Saddle Stitch Finisher is installed.
The “Staple” option is not available when the Group Copies / Magazine sort function is selected.
Stapling cannot be set when the following paper sizes are selected in the [Print Paper Size] box in
the [Basic] tab.
-A5
-A6
-J Post Card
- J Double Post Card
- IndexCard 3x5"
- 305 x 457 mm
-Statement
- 12 x 18"
-A4 Tab
-Letter Tab
- 320 x 450 mm
- 320 x 460 mm
- 13 x 19"
- Envelope Com9
- Envelope Com10
- Envelope Monarch
- Envelope DL
- Envelope Cho-3
- Envelope Cho-4
- Envelope You-4
- Envelope C5
- Custom Paper Size
Stapling cannot be set when the following paper types are selected at the [Paper Type] box in the
[Basic] tab. However, this may differ depending on your model or whether the Finisher is installed.
- Thick 4
- Thick 5
- Special 1 - 6
- Transparency
- Envelope 1 - 4
- Thick 4 (Back)
- Special 1 (Back)
- Special 2 (Back)
- Special 3 (Back)
For detailed instructions on how to print with the [Staple] setting, see the following page:
P.118 “Stapling”
To Next Page
Loading...
